As we have mod_userdir protection for a few servers, some of our clients may need to view the site till the site gets fully propagated. So, this knowledgebase will guide a secondary method to view the site without the tide sign.

Browse the following directory in your C Drive >> Windows >> System32 >> Drivers >> Etc >> Edit the file named "hosts" with a notepad.
By default, there should be a line like this:

"127.0.0.1 localhost"

Go to the next line and add this:
23.227.166.160 tempdomain.dev
23.227.166.160 www.tempdomain.dev

Now note, replace tempdomain.dev with your own domain and change 23.227.166.160 with the IP allocated for your account.

Save the file and try pinging your domain. It should point to the IP you listed in hosts file. And if you try to browse your site now, it should go to our server or the IP you listed in hosts file. Here is how you can do this on most common OS;

Windows 8, Windows 7, and Windows Vista

Windows 8, Windows 7, and Windows Vista use User Account Control (UAC), so Notepad must be run as Administrator.

For Windows 8

  1. Press the Windows key.
  2. Type Notepad in the search field.
  3. In the search results, right-click Notepad and select Run as administrator.
  4. In Notepad, open the following file: c:\Windows\System32\Drivers\etc\hosts
  5. Make the necessary changes to the file.
  6. Click File > Save to save your changes.
For Windows 7 and Windows Vista

  1. Click Start > All Programs > Accessories.
  2. Right-click Notepad and select Run as administrator.
  3. Click Continue on the Windows needs your permission UAC window.
  4. When Notepad opens, click File > Open.
  5. In the File name field, type C:\Windows\System32\Drivers\etc\hosts.
  6. Click Open.
  7. Make the necessary changes to the file.
  8. Click File > Save to save your changes.

Windows NT, Windows 2000, and Windows XP

  1. Click Start > All Programs > Accessories > Notepad.
  2. Click File > Open.
  3. In the File name field, type C:\Windows\System32\Drivers\etc\hosts.
  4. Click Open.
  5. Make the necessary changes to the file.
  6. Click File > Save to save your changes.

Linux

  1. Open a terminal window.
  2. Open the hosts file in a text editor (you can use any text editor) by typing the following line: 
    sudo nano /etc/hosts
  3. Enter your domain user password.
  4. Make the necessary changes to the file.
  5. Press Control-x.
  6. When asked if you want to save your changes, answer y.

Mac OS X 10.0 through 10.1.5

  1. Open /Applications/Utilities/NetInfo Manager.
  2. To allow editing of the NetInfo database, click the padlock in the lower-left corner of the window.
  3. Enter your domain user password and click OK.
  4. In the second column of the browser view, select the node named machines.
    You will see entries for -DHCP-, broadcasthost, and localhost in the third column.
  5. In the third column, select localhost.
  6. From the Edit menu, select Duplicate. (The quickest way to create a new entry is to duplicate an existing one.)
    A confirmation alert appears.
  7. Click Duplicate.
    A new entry called localhost copy appears, and its properties are shown below the browser view.
  8. Double-click the value of the ip_address property and enter the IP address of the other computer.
  9. Double-click the value of the name property and enter the hostname you want for the other computer.
  10. Click the serves property and select Delete from the Edit menu.
  11. From the File menu, select Save.
    A confirmation alert appears.
  12. Click Update this copy.
  13. Repeat steps 6 through 12 for each additional host entry that you want to add.
  14. From the NetInfo Manager menu, select Quit.
    You do not need to restart the computer.

Mac OS X 10.6 through 10.15 and above

  1. Open Applications > Utilities > Terminal.
  2. Open the hosts file by typing the following line in the terminal window: 
    sudo nano /private/etc/hosts
  3. Type your domain user password when prompted.
  4. Edit the hosts file.
    The file contains some comments (lines starting with the # symbol), and some default hostname mappings (for example, 127.0.0.1 – local host). Add your new mappings after the default mappings.
  5. Save the hosts file by pressing Control+x and answering y.
Make your changes take effect by flushing the DNS cache with the following command: 
dscacheutil -flushcache

sudo killall -HUP mDNSResponder
The new mappings should now take effect.

  Print

Comments

  Add Comment

Confirm Submission

Please enter the text from the image in the box provided; this helps us to prevent spam.